Sto Render

StoRend – Synthetic Render Systems

Sto render

The StoRend range of Sto render systems allow you the flexibility to realise even the most demanding designs.

They can be flat or curved, concave or convex, white or vibrantly coloured.

By specifying Sto thin-coat synthetic renders, you avoid the problems associated with traditional cementitious renders, such as cracking and colour fading.

Sto renders feature greater durability, exceptional flexibility and are through-coloured to reduce maintenance requirements.

StoRend synthetic render systemsStoRend synthetic render systems assist in overcoming many substrate issues to provide an attractive, through-coloured and long lasting render finish.

Sto synthetic renders are available in a wide selection of textures and grain sizes, and in a range of up to 800 colours.

For Masonry, Brickwork & Blockwork

StoRend Sto Render systems for masonry, brickwork and blockwork substrates combine a levelling coat for correcting surface irregularities (up to 20mm) with an attractive synthetic render finish.

StoRend Flex Cote

StoRend Flex Cote

Our flagship synthetic render system uses only the highest quality materials to provide exceptional crack resistance, weather protection and a durable,

good looking render finish. The cement-free StoArmat Classic reinforcing coat provides up to 15 times more crack resistance than traditional cementitious renders.

1. Substrate

Brickwork, blockwork or masonry

2. Levelling Coat

StoLevell Cote

3. Reinforcing Coat

StoArmat Classic cement-free reinforcing render.

4. Reinforcing Mesh

Sto Glass Fibre Mesh embedded into the reinforcing coat.

5. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)

StoRend Cote

StoRend CoteA cost-effective, weatherproof and low maintenance render system designed for substrates with minimum mechanical movement, and finished in a through-coloured synthetic Sto render.

1. Substrate

Brickwork, blockwork or masonry

2. Levelling Coat

StoLevell Cote

3. Primer

Sto-Primer intermediate coat for render finishes

4. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)

For Porous/Smooth Substrates

StoRend systems for substrates with low adhesion use a fibre-reinforced levelling coat to provide a stronger bond with the substrate, and prevent unwanted surface defects such as crazing.

StoRend Fibre Plus

StoRend Fibre PlusA high quality render system with a fibre-reinforced levelling coat combined with a tough, flexible reinforcing mesh to yield exceptional levels of crack resistance.

1. Substrate

Smooth/porous substrates (e.g. aerated concrete)

2. Levelling Coat

StoLevell Reno fibre-reinforced levelling coat

3. Reinforcing Mesh

Sto Glass Fibre Mesh embedded into the levelling coat

4. Primer

Sto-Primer intermediate coat for render finishes

5. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)

StoRend Fibre

StoRend FibreA modified, fibre-reinforced levelling system, designed for substrates with low adhesion and little risk of mechanical movement. If there is a risk, the StoRend Fibre Plus system should be used.

1. Substrate

Porous/smooth substrates (e.g. aerated concrete)

2. Levelling Coat

StoLevell Reno fibre-reinforced levelling coat

3. Primer

Sto-Primer intermediate coat for render finishes

4. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)

For Refurbishment

Ideally suited for refurbishment, the following StoRend systems have been designed for application onto existing render systems or trouble substrates.

StoRend Flex

StoRend FlexA highly flexible and crack resistant render system designed for the refurbishment of existing rendered substrates.

1. Substrate

Existing, primed render. A range of primers are available depending on the nature of the rendered substrate.

2. Reinforcing Coat

StoArmat Classic cement-free reinforcing render

3. Reinforcing Mesh

Sto Glass Fibre Mesh embedded into the reinforcing coat

4. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)

StoRend Flex onto Carrier Board

StoRend Flex onto Carrier BoardThe StoRend Flex system can also be applied onto a StoVentec carrier board for the renovation of severely uneven substrates or as part of a timber frame system.

1. Carrier Board

StoVentec Render Carrier Board (no primer required)

2. Reinforcing Coat

StoArmat Classic cement-free reinforcing render

3. Reinforcing Mesh

Sto Glass Fibre Mesh embedded into the reinforcing coat

4. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)

StoReno

StoRenoA reinforced dowelling system for the renovation or damaged render or external wall insulation systems.

1. Substrate

Damaged render system or external wall insulation system

2. Levelling Coat

StoLevell Uni levelling and adhesive coat

3. Carrier Board

StoReno Plan mesh-reinforced carrier board with dowel recesses

StoReno dowel fixings as specified

4. Reinforcing Coat

StoArmat Classic cement-free reinforcing render

5. Reinforcing Mesh

Sto Glass Fibre Mesh embedded into the reinforcing render

6. Render Finish

Acrylic render finish (Stolit)

Acrylic render finish with aggregate (StoSuperlit)

Silicone resin render finish (StoSilco)

Self-cleaning render with Lotus-Effect® (StoLotusan)